*Additional ICs are available upon request. Please contact us for lead time and if you have specific IC requirements or questions.
Vulcan RFID™ Onsite Printable Universal Mini Asset Tag
Developed using the same premise as our original Vulcan RFID™ Custom Universal Asset Tag, this smaller tag utilizes a patented inlay design and passive RFID technology to obtain incredible read ranges on a variety of different materials - metal, plastic and even wood. These tags offer customer programming that matches the printed bar code information for two tracking technologies. Another benefit - you can print your own Vulcan RFID™ Universal Mini Asset Tags on demand! This unique inlay adheres to a subsurface printed label constructed of durable, yet flexible polyester.
NOTE: Due to market demands, this product is transitioning away from the Alien Higgs 3 to the Impinj Monza R6-P IC. Sample stock may still contain the Alien Higgs 3 while re-orders and higher volumes will contain the Impinj Monza R6-P chip. Additional ICs are available upon request. Please contact us for more details.
Data Sheet — Vulcan RFID™ Onsite Printable Universal Mini Asset Tag
Need help selecting the right tag? Check out our tag guide.
Why buy this tag?
The Vulcan RFID™ Universal Mini Asset Tag is printable onsite so that you can print these tags whenever you need them, wherever you need them, and however you need them. With smaller footprint and lower profile, the Universal Mini Asset Tag easily fits where other tags may be too large and obtrusive and still gives incredible read ranges compared to other tags in its class.
If you need a quantity that is not listed above, please contact us for a custom quote.
- Smaller footprint and lower profile while still achieving excellent read range sets this product apart from other patented inlay design obtains.
- Patented inlay design obtains excellent read ranges regardless of surface metal, plastic, even wood.
- Small size of 2 ¾” x ¾” allows for fit in the smallest of spaces.
- Specifically engineered to encode and print no matter the environment.
- Thermal transfer printer receptive.
For best results, this tag should be used with the following RFID printer: SATO CL4NX Series Thermal UHF RFID Printer.
|Air Interface Protocol:||EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C)|
|Operating Frequency:||FCC (902-928 MHz)|
|IC Type:||Alien Higgs 3 or Impinj Monza R6-P (See details above)|
|Memory:|| Alien Higgs 3: EPC 96 bits, User 512 bits, TID 64 bits
Impinj Monza R6-P: EPC 128/96 bits, User 32/64 bits, TID 48 bits
|EPC Memory Content:||Dependent on desired encoding|
|Max Read Distance (Metal):||Up to 4.1 m (13.47 ft)|
|Max Read Distance (Plastic):||Up to 2.1 m (6.8 ft)|
|Max Read Distance (Cardboard):||Up to 1.8 m (6 ft)|
|Max Read Distance (Wood):||Up to 2.9 m (9.67 ft)|
|Max Read Distance (Glass):||Up to 4.1 m (13.33 ft)|
|Applicable Surface Materials:||Metal, plastic, cardboard, wood, glass|
|Tag Form Factor:||Label tag|
|Tag Materials:||Thermal transfer printable substrate (polyester)|
|Recommended Ribbon:||Full resin ribbon or other ribbon that is compatible with synthetic film|
|Attachment Method:||Pressure sensitive acrylic|
|Dimensions:||69.85 x 19.05 mm (2.75 x 0.75 in)|
|Weight:||< 1 g|
|Operating Temperature:||-50° to 85° C (-58° to 185° F)|