Vulcan RFID™ HDMNT-150MM Mounting Bracket

Description

Vulcan RFID™ HDMNT-150MM Mounting Bracket

Appropriate for indoor or outdoor mounting, the Vulcan RFID™ HDMNT-150MM is a heavy duty die-cast aluminum mounting bracket that articulates in both the vertical and horizontal plane. This mounting bracket kit includes all of the hardware that you will need to mount directly to a wall, pole, or uni-strut. By using worm gear hose clamps or straps (NOT included) you can use the HDMNT-150MM to mount to a bollard or utility pole. This Vulcan RFID™ mounting bracket is designed to mount on various Zebra and Impinj panel antennas. For more details on the compatibility of the Vulcan RFID™ HDMT-150MM Mounting Bracket, see the compatibility section below or contact us.

Data Sheet — Vulcan RFID™  HDMNT-150MM Mounting Bracket

Quick Start Guide — Vulcan RFID™ HDMNT-150MM Mounting Bracket

What's included?

• Vulcan RFID™ HDMNT-150MM Mounting Kit Unit
• Hardware for mounting to wall, pole, or mast included

Compatibility

• Zebra AN440 (RH/LH CP) Indoor RFID Antenna (902-928 MHz)
• Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)
• Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)
• Zebra AN610 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
• Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
• Impinj LHCP Far Field Antenna (FCC/ETSI)
• Impinj RHCP Far Field Antenna (FCC/ETSI)
• Invengo XC-AF26 High Gain RFID Antenna
• Laird Bistatic PRL90209 (CP) RFID Antenna (FCC)
• RFMAX S9028PCRJ / S8658PRJ (RHCP) Indoor RFID Antenna (FCC/ETSI)
• RFMAX S9028PCLJ / S8658PLJ (LHCP) Indoor RFID Antenna (FCC/ETSI)
• MIST / Juniper 4x4 MiMo Antenna # PDQ24518-MI1 (for AP41, AP43, AP61 access points)

Requirements

For the Vulcan RFID™ HDMNT-150MM Mounting Bracket to be used with the Zebra AN610 Slimline (LHCP), and Zebra AN620 Slimline (LHCP) RFID Antennas, the mounting bracket MUST be used in conjunction with a compatible Vulcan RFID™ mounting plate. The compatible mounting plates are listed below. 

• Vulcan RFID™ Mounting Plate for Zebra AN610
• Vulcan RFID™ Mounting Plate for Zebra AN620

This mounting plate requirement is ONLY for the Zebra AN610 Zebra AN620 indoor RFID antennas. A mounting plate is NOT required to mount any of the other antennas listed in the compatibility section above. 

Note: If mounting the Times-7 A6031, Times-7 B6031, or Times-7 A6032 indoor antennas, please see the Vulcan RFID™ HDMNT-100MM Bracket Mounting Bracket.