Description
*This product is reaching end-of-life and will soon be discontinued. Please contact us for a recommended replacement product.*
Impinj Guardwall (CP) Indoor RFID Antenna (FCC/ETSI)
The Impinj Guardwall Indoor Antenna is geared toward item-level reading and provides a tightly controlled read zone and intense RF field, critical to penetrating deep into packed cases. When used as a pair, the Guardwall antenna absorbs energy from its opposing mate so that very little passes beyond the exterior face. This configuration maximizes stray read rejection by constraining the read zone to the area within the two antennas. It also increases read reliability by maximizing the intensity within the read zone.
US Data Sheet — Impinj Guardwall (CP) Indoor RFID Antenna
EU Data Sheet — Impinj Guardwall (CP) Indoor RFID Antenna
Need help selecting the right antenna? Check out our antenna guide.
What's included?
- Impinj Guardwall Antenna Unit
- Two 6 ft Antenna Cables (LMR-195 RP-TNC Male to SMA Male)
Why buy this antenna?
Using two Impinj Guardwall RFID Antennas will generate an unparalleled level of read zone intensity and focus which is ideal for getting accurate reads deep within boxes or containers.
Features
- Well-controlled read zone minimizes stray reads.
- Optimized for reading item-level tags packed in cases.
- Designed for RoHS compliance.
Information
PLEASE NOTE: This antenna may only be used with an Impinj reader or “Powered by Impinj” reader. Using this antenna with any other device voids the antenna warranty and may cause damage to the antenna or device.
We can supply you with ANY length custom cable with ANY type of connectors. If you don't see the cable you need, please contact us so we can assist you.
Video
| ELECTRICAL: | |
|---|---|
| Operating Frequency: | FCC (902-928 MHz), ETSI (865-868 MHz) |
| Polarization: | Right hand and left hand circular |
| Gain: | 6.0 dBi |
| Max Read Distance: | Not published |
| Elevation Beamwidth: | 55° |
| Azimuth Beamwidth: | 55° |
| MECHANICAL: | |
| Connector Type: | 2 SMA female (connects to SMA male) |
| Cable: | Two (2) 1.8 m (6 ft) antenna cables (SMA Male to RP-TNC Male) |
| Mounting: | Brackets sold seperately |
| Dimensions: | 702 x 402 x 73 mm (27.6 x 15.8 x 2.9 in) |
| Weight: | 5 kg (11 lbs) |
| ENVIRONMENT: | |
| IP Rating: | IP 51 |
| Operating Temperature: | 0° to 40 C° (32° to 104 F°) |
| fbt-product: | 1316 |
| fbt-product: | 2263 |
| fbt-product: | 2165 |
| atc-product: | 2856 |
| atc-product: | 1665 |
| atc-product: | 2958 |
| atc-product: | 2471 |
