Healthcare & Hospital Labels
Healthcare Barcode Scanners
Healthcare Mobile Computers
Healthcare Mobile Carts
Healthcare Monitors
Healthcare Printers
Healthcare RFID Antennas
Healthcare RFID Readers
Healthcare RFID Tags
-
rf IDEAS WAVE ID® SP Plus Keystroke LF/HF RFID ReaderSKU: RDR-805H1BKU
Key Features- Connectivity: USB, Keyboard Emulation
- Frequency: 125/132 kHz proximity and 13.56 MHz contactless
- Form Factor: 76 x 51 x 15 mm (3.0 x 2.0 x 0.6 in) ultra-slim
-
Zebra 4" x 2" EnduraGuard 4000D Direct Thermal Label | For Mobile Printers | Case of 36 Rolls - 78 Labels per RollSKU: ZIPEGM10045248
Key Features- Size: 101.6 x 50.8 mm (4 x 2 in)
- Material: Direct thermal synthetic polypropylene, permanent acrylic adhesive
- Durability: UV, temperature (-54°C to 82°C), and chemical resistant
-
Zebra 4" x 6" EnduraGuard 4000D Direct Thermal Label | For Mobile Printers | Case of 36 Rolls - 78 Labels per RollSKU: ZIPEGM10045247
Key Features- Size: 101.6 x 152.4 mm (4 x 6 in) direct thermal labels
- Material: Synthetic polypropylene, permanent acrylic adhesive
- Durability: Weather, chemical, and temperature resistant (-54°C to 82°C)
-
Key Features- Resolution: 600 dpi, prints labels as small as 3 mm (0.12 in)
- Print Method: Thermal Transfer/Direct Thermal
- Connectivity: USB, Serial, Gigabit Ethernet, Bluetooth 4.1, USB Host
-
Key Features- Linerless Printing: Pre-installed cutter with label-taken sensor
- Print Speed: Up to 152.4 mm/sec (6 ips)
- Connectivity: USB Type-C, RS-232C serial, 10/100 Ethernet
-
Key Features- Temperature Sensor: Asygn AS3211.7 IC for accurate, passive monitoring
- Operation: Fully passive, no batteries required
- Design: Slim, compact for space-limited applications
-
Key Features- RFID Encoding: RAIN UHF passive, standard and on-metal tags up to 1.65 mm (0.06 in)
- Print Speed: Up to 304.8 mm/s (12 in/s)
- Remote Management: SOTI Connect, TSC Console, embedded webpage
-
Zebra 3.88" x 1.31" Returnable Transport Item M830 RFID Label | For Industrial Printers | Case of 4 Rolls - 2,000 Labels per RollSKU: ZIPRT10043842
Key Features- Size: 98.6 x 33.3 mm (3.88 x 1.31 in)
- Read Range: Up to 21 m (68.9 ft)
- Inlay: AD Dogbone™ M830 with Gen2X
-
Key Features- Print Speed: 152.4 mm/sec (6 ips)
- Compact Design: 25% smaller than comparable 2-inch printers
- Easy Media Loading: Drop-in spindle-less design for rolls up to 127 mm (5 in) OD
-
Key Features- Size: 50 x 12 mm (1.97 x 0.47 in)
- Memory: 128-bit EPC, 96-bit TID
- Durability: 200+ industrial wash cycles
-
Key Features- Size: 50 x 12 mm (1.97 x 0.47 in)
- Memory: 128-bit EPC, 96-bit TID
- Durability: 200+ industrial wash cycles, 90-180°C (194-356°F)
-
Key Features- Size: 70 x 15 mm (2.76 x 0.59 in)
- Memory: NXP UCODE 9xe chip, 128-bit EPC, 96-bit TID
- Durability: 200+ commercial wash cycles, 90°C to 180°C
-
Key Features- Size: 70 mm x 15 mm (2.76 in x 0.59 in)
- Memory: 128-bit EPC, 96-bit TID with Impinj M830 chip
- Durability: 200+ commercial wash cycles, 90°C to 180°C operational temp
-
Key Features- Coverage: 20-60 m² (215-646 sq ft) per unit; location accuracy 1-2 m (3.3-6.6 ft)
- High Read Performance: M7e-TERA module with up to 31.5 dBm conducted power
- Simple Installation: Power over Ethernet (PoE 802.3at) with no RF cables required
-
Key Features- Durability: Survives 30 drops from 1.8 m (5.9 ft)
- Scanning: Reads 1D, 2D, postal, OCR, and Digimarc digital watermark codes
- Dual Mode: Handheld and presentation scanning modes
-
HID LinTRAK C15S-MRI-M850 UHF RFID Laundry TagSKU: TL850E10
Key Features- Compact Design: 15 x 52 mm (0.6 x 2.04 in) with 5 mm sewing zone
- Extreme Durability: Withstands 200 commercial wash cycles or 100 sterilization cycles
- MR-Conditional: Validated at 1.5 and 3.0 Tesla for medical environments
-
Key Features- Autoclave-Resistant: Survives over 600 cycles at 134°C (273°F)
- Extended Read Range: Up to 4 m (13.12 ft) on metal, 7 m (22.97 ft) off metal
- Waterproof Protection: IP68 and IP69K rated
-
Evolis Zenius 2 Expert Single-Sided Card PrinterSKU: ZN2-0002
Key Features- Print Speed: 180 color cards/hour, 700 monochrome cards/hour
- Connectivity: USB, Ethernet TCP-IP (10BaseT/100BaseT)
- Print Security: YMCKOO ribbons for UV effect and double-layer overlay
-
Evolis Zenius 2 Classic Single-Sided Card PrinterSKU: ZN2-0001-A
Key Features- Print Speed: Up to 180 color cards/hour, 700 monochrome cards/hour
- Features: Rewritable Card Support, Digital Data Erasure
- Output Capacity: Front (25 cards) and rear (50 cards) card receptacles
-
Key Features- Performance: Qualcomm 5430 octa-core 2.1 GHz processor, 8GB RAM
- Power: PoE++ (90W), USB-C Power Delivery, 12-24V DC
- Connectivity: HDMI 2.0, USB-C 3.2, three USB-A 3.2 ports
More about Healthcare
Atlas RFID offers a comprehensive portfolio of mobile computers, scanners, printers, labels, and wristbands specifically engineered for use in healthcare environments. Designed with sanitization, efficiency, and performance in mind, these high-quality barcoding and RFID products empower healthcare organizations to deliver a higher level of patient care from admittance to post-care services.
These ultra-portable devices are secure, disinfectant-ready, ergonomic, and easy-to-use. Additionally, many of these devices feature the most powerful family of ready-to-use voice solutions, secure text messaging, video conferencing technology, mobile alarms/alerts, and more.