ThingMagic M7e-TERA Carrier Board by JADAK

The Thingmagic M7e-TERA Carrier Board is a M7e-TERA module soldered to a carrier board that adds connectivity through its four antenna ports. This carrier board integrates the M7e-TERA module into an embedded system by adding interface functionality. Featuring the Impinj E710 RAIN RFID reader chip, the module has very low power consumption and is ideal for battery-operated, low cost, small form-factor portable readers. ThingMagic TERA's wide RF output range (0 dBm to +31.5 dBm) is important for the read/write requirements for RFID-enabled printers and tag commissioning stations.

Note: This product is a reader module, NOT a finished RFID reader, and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. If you are interested in an existing finished reader product, check out our line of finished ThingMagic readers.

Need help selecting the right reader module? Check out our reader module guide.

• ThingMagic M7e-TERA Carrier Board by JADAK Unit

The ThingMagic M7e-TERA Carrier Board is a perfect solution for prototyping and proof-of-concept applications. The board includes the thermal advantages of solder-down and heat spreader along with access to external connectors. This top of the line reader module has the widest RF output range being 0 dBm to 31.5 dBm. This is an ideal solution for fast moving tags and areas with large tag populations with a read rate of 800 tags per second and a max read distance of over 12 meters.

• Integral heat spreader.
• Impinj E310 RAIN RFID reader chip
• Four port antenna connectors.
• Separate read and write levels, command adjustable.
• High tag read rate of 800 tags per second.
• Applications: mobile devices, tag commissioning stations, battery-operated devices, smartphone accessories, medical equipment, kiosks, and vending machines.