Race Timing RFID Tag Sample Pack | Impinj M800 Series

Timing your next race shouldn't mean guessing whether your tags will perform when it counts. The Race Timing RFID Tag Sample Pack gives you 10 Avery Dennison Smartrac DogBone Wet Inlay+ tags and 10 Vulcan RFID Bolt labels, both built on the Impinj M830 IC, so you can test two of the most trusted UHF RFID tag formats for race timing side by side before committing to a full order. Whether you're timing a 5K, a marathon, a triathlon, or a cycling event, this pack helps you find the right fit for your bibs, timing system, and read environment.

Both tags in this sample pack are engineered for the demands of race timing. The DogBone Wet Inlay+ delivers read ranges up to 19.8-21.3 m (65-70 ft) with Impinj AutoTune V3 for reliable performance across varying bib materials and environmental conditions. The Vulcan RFID Bolt pairs those same performance advantages with a durable matte white polypropylene facestock that's printable with a resin ribbon, making it a strong option when a finished, printable label is preferred over a bare inlay. Both tags carry 128-bit EPC memory and operate globally at 860-960 MHz.

Vulcan RFID Bolt UHF RFID Label | M830 - When you need a tag that performs in fast-paced, high-density read environments, the Vulcan RFID Bolt delivers. Built on the Impinj M830 IC with a durable matte white polypropylene facestock, the Bolt combines strong read performance with a printable label format that works directly on race bibs. With read ranges up to 19.8-21.3 m (65-70 ft) and 128-bit EPC memory, it's a purpose-built solution for race timing applications.

Avery Dennison Smartrac DogBone RFID Wet Inlay+ | M830 - The DogBone Wet Inlay+ is one of the most widely adopted UHF RFID tags on the market, and for good reason. Powered by the Impinj M830 IC, it delivers consistent, reliable reads across a broad range of materials and environments, from race timing bibs and distribution center shelving to returnable transport items and global supply chains. Its proven track record across so many verticals makes it a natural starting point for any race timing evaluation.

• 10 Vulcan RFID Bolt UHF RFID Label | M830
• 10 Avery Dennison Smartrac DogBone RFID Wet Inlay+ | M830

This sample pack is purpose-built for race timing, pairing two proven Impinj M800-based tags that are already trusted by race directors and timing professionals worldwide. Rather than committing to a single tag format before testing, you get a direct side-by-side comparison of a wet inlay and a printable label in your actual timing setup, so your final tag decision is backed by real-world results.

• Pack Contents: 10 Avery Dennison Smartrac DogBone Wet Inlay+ (M830) and 10 Vulcan RFID Bolt Labels (M830)
• IC Type: Impinj M830 on both tags; EPC 128-bit memory, global 860-960 MHz operation
• DogBone Wet Inlay+ Read Range: Up to 19.8-21.3 m (65-70 ft); 97 x 27 mm (3.8 x 1.1 in) die-cut size
• Vulcan RFID Bolt Read Range: Up to 19.8-21.3 m (65-70 ft); 97 x 27 mm (3.82 x 1.06 in) printable label face
• DogBone Form Factor: Wet Inlay+ with extra IC protection layer; adhesive backing on PET substrate
• Bolt Form Factor: Matte white polypropylene label; resin ribbon printable for bib customization
• AutoTune V3: Both tags self-tune to optimize RF performance across bib materials and environments
• M830 Advantages: Improved read sensitivity and reliability over previous-generation M700 ICs
• Ideal For: Race directors, timing professionals, and event organizers evaluating RFID tags for running, cycling, and triathlon timing applications