Charging Stations & Carts
Isolation Transformers
Network Interfaces & Sensors
Power Conditioners
Power Distribution Units (PDUs)
Power Inverters
Power Strips
Power Supplies
Surge Protectors
-
Key Features- Voltage: 192 VDC system voltage with 16 x 12V 5.5AH sealed lead acid batteries
- Form Factor: 4U rack-mount, pre-assembled and ready to install
- Compatibility: Fits SU5000RT4UHV, SU6000RT4UHV, SU6000RT4UTF and select SmartOnline UPS models
-
Eaton Tripp Lite SMART2200RM2UN 1950VA Line-Interactive Rack/Tower UPSSKU: SMART2200RM2UN
Key Features- Capacity: 1950VA / 1950W Line-Interactive UPS with Unity Power Factor
- Network Management: Pre-installed WEBCARDLXE for 24/7 remote monitoring and control
- Outlets: (6) NEMA 5-20R + (1) L5-20R with pure sine wave output and load shedding
-
Key Features- Voltage: 48 VDC system with (8) 12V 5AH sealed lead acid batteries
- Form Factor: 2U rack-mount, minimum 18 in rack depth required
- Installation: Pre-assembled and wired, ready for immediate installation
-
Key Features- Capacity: 1500VA / 900W Line-Interactive Sine Wave UPS
- Runtime: 20 min. at half load, 8 min. at full load
- Outlets: 8 NEMA 5-15R with 690-joule surge protection & AVR
-
Key Features- Voltage: 36V DC external battery pack for compatible Tripp Lite UPS systems
- Mounting: 2U Rack/Tower - fits 19 in. 4-post racks with included hardware
- Expandability: Daisy-chain connector supports additional battery packs for extended runtime
-
Key Features- Connectors: NEMA L6-20P (locking) to IEC-320-C19
- Length: 1.83 m (6 ft)
- Wire Gauge: 12 AWG, rated for 20A / 250V high-power connections
-
Key Features- Capacity: 2.4kW / 20A Single-Phase 120V Power Distribution
- Outlets: 13 NEMA 5-15/20R (12 Rear, 1 Front) with 20A Circuit Breaker
- Mounting: 1U Rack-Mount with 15 ft. (4.57 m) Input Cord
-
Key Features- Length: 0.31 m (1 ft)
- Connectors: HD15 Male to 2x HD15 Female
- Resolution: Supports up to 1600 x 1200 with double-shielded, 75-ohm coax conductors
-
Key Features- Length: 1.83 m (6 ft)
- Connectors: IEC-320-C14 Male to IEC-320-C13 Female
- Rating: 10A, 100-250V, 18 AWG
-
Eaton Tripp Lite RS-1215-20 20A 12-Outlet Power Strip 1U Rack-Mount | 6 Front/6 Rear OutletsSKU: RS1215-20
Key Features- Outlets: 12 NEMA 5-20R outlets (6 front-facing / 6 rear-facing)
- Capacity: 20A / 2400W with integrated circuit breaker
- Mounting: 1U rack-mount, wall-mount, and undercounter installation
-
Key Features- Protection: 660-joule surge protection with < 1ns response time
- Outlets: 3 NEMA 5-15R outlets, direct plug-in design
- Features: Diagnostic LEDs, EMI/RFI filtering, automatic shutoff
-
Eaton Tripp Lite SM3000RMXL2UTAA 3000VA Line-Interactive Sine Wave 2U Rack/Tower UPS | TAA CompliantSKU: SM3000RMXL2UTAA
Key Features- Capacity: 3000VA / 2880W Line-Interactive Sine Wave UPS, 0.96 Power Factor
- Protection: AVR corrects brownouts and overvoltages from 83V to 145V without battery
- Outlets: (8) NEMA 5-15/20R + (1) L5-30R with two independently switchable load banks
-
Eaton Tripp Lite PS-606-HG 6-Outlet UL 1363 Medical-Grade Power Strip | Antimicrobial, 6 ft CordSKU: PS-606-HG
Key Features- Outlets: 6 NEMA 5-15R-HG Hospital-Grade Outlets, 1800W output
- Protection: Resettable 15A circuit breaker, switchless design prevents accidental shut-off
- Antimicrobial: Patented coating resists bacteria, viruses, fungi, mold & mildew (JIS Z 2801:2000)
-
Key Features- Outlets: 12 NEMA 5-15R outlets with 2.638 in. center-to-center spacing
- Power: 15A circuit breaker, 1800W capacity, 120V AC
- Cord: 15 ft (4.57 m) cord with lighted locking switch cover
-
Eaton Tripp Lite BP48V27-2US 48V External Battery Pack 2U Rack/TowerSKU: BP48V27-2US
Key Features- Voltage: 48V DC external battery pack for compatible rack-mount UPS systems
- Mounting: 2U rack/tower form factor; 4-post rackmount hardware included
- Expandable: Daisy-chain connector supports multiple external battery packs
-
Eaton Tripp Lite RBC24-SUTWR 24V UPS Replacement Battery Cartridge for SmartOnline Tower UPSSKU: RBC24-SUTWR
Key Features- Voltage: 24V DC system voltage with (2) 12V 9AH sealed lead acid batteries
- Compatibility: Fits SU750XL and SU1000XLA SmartOnline Tower UPS models
- Installation: Pre-assembled and wired battery kit, ready for immediate installation
-
Key Features- Outlets: 12 NEMA 5-15R (6 front-facing, 6 rear-facing) with right-angle orientation
- Power: 1800W output, 15A circuit breaker, NEMA 5-15P plug
- Mounting: 1U rack-mount, wall-mount, or undercounter with 15 ft. cord
-
Key Features- Voltage: 12 VDC replacement battery cartridge (two 6V 7.2AH sealed lead acid batteries)
- Compatibility: Fits SMART500RT1U and SMX500RT1U UPS systems
- Form Factor: 1U rack-mount, pre-assembled and ready for installation
-
Key Features- Adapter: NEMA 5-20P to NEMA L5-20R, 20A, 120V
- Length: 21.99 cm (8.66 in)
- Cable: Heavy-duty 12 AWG, locking L5-20R connector
-
Key Features- Outlets: 6 Front-Facing NEMA 5-15R Outlets, 1800W Capacity
- Mounting: 1U Rack-Mount, Wall-Mount, and Undercounter Installation
- Cord: 15 ft (4.57 m) Cord with Lighted Switch and Locking Switch Cover
-
Eaton Tripp Lite RS-1215-20T 20A 120V 12-Outlet Power Strip | 1U Rack-Mount L5-20P 15 ft CordSKU: RS-1215-20T
Key Features- Outlets: 12 x NEMA 5-15/20R (6 Front-Facing, 6 Rear-Facing)
- Capacity: 20A / 2400W with circuit breaker protection
- Mounting: 1U Rack-Mount with 15 ft NEMA L5-20P cord
-
Eaton Tripp Lite IBAR12-20ULTRA 3840 Joules 12-Outlet Surge Protector | 1U RackmountSKU: IBAR12-20ULTRA
Key Features- Protection: Network-grade 3840-joule surge protection, 96,000A surge current rating
- Outlets: 12 total - (2) NEMA 5-15R front, (10) NEMA 5-20R rear in isolated filter banks
- Mounting: 1U rackmount with 15 ft. (4.57 m) cord and NEMA 5-20P plug
-
Key Features- Protection: 720-joule surge protection with < 1 ns response time
- Outlets: 4 side-mounted NEMA 5-15R outlets including 2 transformer-friendly
- Design: Direct plug-in converts 2 wall outlets into 4
-
Key Features- Capacity: 5.5kW, 24A continuous single-phase 208/230V
- Outlets: 30 total (24 C13, 6 C19) in two separately breakered 15A load banks
- Form Factor: 0U vertical rackmount, 63.75 in. with dual LED current meters
-
Key Features- Outlets: 10 NEMA 5-15R outlets with large plug spacing
- Cord: 15 ft (4.57 m) input cord with 15A resettable circuit breaker
- Housing: Rugged all-metal construction with lighted master power switch
-
Eaton Tripp Lite IBAR12 3840 Joules 12-Outlet Surge Protector | 15 ft Cord, 1U RackmountSKU: IBAR12
Key Features- Protection: Network-grade 3840-joule surge protection rating
- Outlets: 12 NEMA 5-15R outlets in 2 exclusive isolated filter banks
- Mounting: 1U rackmount with 15 ft. cord and EMI/RFI filtering up to 80 dB
-
Eaton Tripp Lite BP192V12-3U 192V External Battery Pack Rack/TowerSKU: BP192V12-3U
Key Features- Voltage: 192V DC external battery pack for compatible Eaton Tripp Lite UPS systems
- Mounting: 3U rack/tower form factor; 4-post rackmount accessories included
- Expandability: Daisy-chain multiple packs for extended runtime; 50A DC output fuse protection
-
Key Features- Length: 0.61 m (2 ft)
- Connectors: NEMA 5-15P to IEC-320-C13
- Wire Gauge: Heavy-duty 14 AWG, 15A, 125V
-
Key Features- Length: 1.83 m (6 ft)
- Connectors: NEMA 5-15P to IEC-320-C13
- Rating: 10A, 125V, 18 AWG
-
Eaton Tripp Lite SU1000RTXLCD2U 1000VA Double-Conversion UPS | 8 Outlets | 2U Rack/TowerSKU: SU1000RTXLCD2U
Key Features- Capacity: 1000VA / 900W Double-Conversion Online UPS with pure sine wave output
- Outlets: 8 NEMA 5-15R with zero transfer time and two switchable load banks
- Expandable: Hot-swappable batteries, up to 4 optional EBMs (BP36RT) for extended runtime
More about Power Management Solutions
Power Management solutions provide the tools needed to distribute, protect, monitor, and optimize power across IT, commercial, educational, healthcare, and industrial environments. From uninterruptible power supplies (UPS), power distribution units (PDUs), surge protectors, chargers, power cords, and more these high-quality accessories are designed to support critical infrastructure and everyday operations. Reliable power management helps safeguard connected equipment from outages, surges, and voltage fluctuations while improving energy efficiency, supporting device charging, and maintaining business continuity. Whether outfitting a data center, network closet, office workspace, classroom, or public charging area, these solutions deliver dependable performance, enhanced power visibility, and scalable support for modern power and connectivity requirements