Key Features
- Ports: 2-Port UHF RFID Reader
- Connectivity: Power over Ethernet (PoE)
- Performance: High read rates, optimal functionality via Autopilot
Impinj Speedway Revolution GPIO Box
$423.00
- UPC:
Impinj | SKU: IPJ-A5000-000
Accessories & Related Products
Key Features
- Tri-color (Red/Yellow/Green) stack light
- Audible buzzer (80 dB)
- 24V operation
Key Features
- Autopilot: Optimizes reader operation for environment.
- 4 Antenna Ports, expandable to 32 with Antenna Hub.
- RF Sensitivity: -84 dBm for greater accuracy and range.
Key Features
- Frequency: 902-928 MHz
- Environmental: IP67 Rated, UL 94-V2 Flammability
- Type: Right-Hand Circularly Polarized (RHCP)
Key Features
- Type: RFID Reader Configuration and Data Management
- Compatible With: Impinj Speedway R420, R220, xSpan
- Supported Protocols: USB-HID, Serial, Ethernet, Web
Key Features
- Expands antenna ports to 32 for R420, 16 for R220, 8 for R120
- Includes Impinj Speedway Antenna Hub and GPIO Adapter
- Requires separate cable purchase and firmware update for R220
Key Features
- Content: Collection of popular articles from RFID Insider
- Topics: RFID basics to intermediate concepts, comprehensive Q&A
- Author: Suzanne Gotfryd, Director of Consumer Marketing at atlasRFIDstore
Key Features
- Connectivity: Linux OS, REST APIs, MQTT, Ethernet, USB, Wi-Fi
- Performance: Industry-leading RFID read performance, edge computing
- Versions: R700v1 (Dual-Core 1 GHz A7), R700v2 (Dual-Core 1 GHz A53)
Key Features
- Range: 0-14 meters (0-45+ feet)
- Frequency: 860 MHz to 955 MHz
- Power: No battery required, powered by RF energy
Key Features
- Diverse Form Factors: Wet inlays, wire tags, hard tags, etc.
- Includes Industry-Leading ICs: Monza R6-P, NXP UCODE 8, Impinj M730, M830
- Variety of Sizes: As small as 1.27 cm (0.5 in) up to 10.16 x 5.08 cm (4 x 2 in)
Product Details
Impinj Speedway Revolution GPIO Box
Impinj designed the Speedway Revolution GPIO Box for use with the Speedway Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an on-board relay to interface with devices require high wattage or an open/short signal. A universal power supply end line cord is also required if the 5VDC supplied by the reader is insufficient (not included, purchase separately).
View Data SheetWhat is included?
- Speedway Revolution GPIO Box Unit
- Reader to GPIO box connector cable
- Universal Power Supply & AC Power Cord, if selected above (Please note that using a non-manufacturer approved power supply voids the warranty)
Why buy this Product?
The Impinj Speedway Revolution GPIO Box interfaces with your Speedway Revolutions reader to seperate your inputs and outputs in your reader for easy access.
Features
- Easy-access screw terminals.
- Power and ground terminals for each input and output.
- Each output can provide 250mA at 24V with optional external universal power supply.
- SPDT Relay output capable of 5A at 240VAC.
- Ability to use reader-supplied 5V for low power digital applications, including the SPDT Relay.
- Highly visible LED indicators for each input and output eases troubleshooting and diagnostics.
- Access to reader’s RS-232 serial interface.
Compatibility
Note: This port pack is NOT compatible with either the Impinj Speedway Revolution R220 UHF RFID Reader - 2 Port (IPJ-REV-R220), or the Impinj R700 RAIN RFID Reader (IPJ-R700-341).
Information
Note: Only use the supplied HD15 cable. Use of a standard VGA cable may damage the reader.
Product Specs
| Product Type: | GPIO Device |
|---|---|
| Vcc: | Max 30V |
| Io: | 250 mA |
| li: | 250 mA |
| Ri: | 15 kΩ |
| IP Rating: | IP 54 |
| Operating Temperature: | -25 to +55 °C (-13 to +131 °F) |
Customer Reviews
Sign in