Description
Vulcan RFID p11 UHF RFID Antenna (FCC/ETSI)
The Vulcan RFID p11 UHF RFID Antenna is a compact patch antenna, with a very thin form factor, circular polarization, and a radiation pattern characterized by a wide beam in all directions in one hemisphere. With three different connector shape options and a very thin form factor, the Vulcan RFID p11 UHF RFID Antenna is an ideal solution for a wide array of applications including but not limited to: smart shelves, smart displays, smart panels, smart tables, and other smart surfaces.
Data Sheet — Vulcan RFID p11 UHF RFID Antenna (FCC/ETSI)
Need help selecting the right antenna? Check out our antenna guide.
What's included?
- Vulcan RFID p11 UHF RFID Antenna Unit
Why buy this antenna?
With three different connector shape options and a very thin form factor, the Vulcan RFID p11 UHF RFID Antenna is an ideal solution for a wide array of applications including but not limited to smart shelves, smart displays, smart panels, and smart tables.
Features
- Very thin form factor (3 mm without connector).
- Good performance.
- Cost effective.
- Radiation pattern characterized by a wide beam in both directions in one hemisphere.
- Common applications: smart shelves, smart displays, smart panels, smart tables, and smart surfaces in general.
- EU Flange Right and EU Flange Straight allow the soldering of a 50 ohm resistor to the antenna.
Information
We can supply you with ANY length custom cable with ANY type of connectors. If you don't see the cable you need, please contact us so we can assist you.
| Product Type: | Antenna |
|---|---|
| Operating Frequency: | FCC (902-928 MHz), ETSI (865-868 MHz) |
| Polarization: | Right Hand Circular |
| Gain: | 3.4 dBi (US), 3.2 dBi (EU) |
| Max Read Distance: | Up to 3 m (9.8 ft) |
| Elevation Beamwidth: | 100˚ |
| Azimuth Beamwidth: | 100˚ |
| Connector Type: | SMA female Flange Straight, SMA female Flange Right Angle, or SMA female Edge Mount (connects to SMA male) |
| Cable: | Not Included |
| Mounting: | Integrated Mounting Holes |
| Dimensions - excluding connector: | 137 x 137 x 3.3 mm (5.4 x 5.4 x 0.13 in) |
| Dimensions - edge mount connector: | 137 x 137 x 8 mm (5.4 x 5.4 x 0.3 in) |
| Dimensions - flange connector: | 137 x 137 x 15 mm (5.4 x 5.4 x 0.6 in) |
| Weight: | 0.11 kg (0.25 lbs) |
| IP Rating: | IP 62 |
| Operating Temperature: | -20˚C to +80˚C (-4˚F to +176˚F) |
