Description
TSL 3419 RAIN RFID Reader Module Developer Kit
TSL 3419 RAIN RFID Reader Module Developer Kit
This reader module developer kit aids developers in exploring and testing the capabilities of the TSL 3419 RAIN RFID Module. With a slim and compact form factor, the TSL 3419 RAIN RFID Reader Module provides flexible mounting options and support for industry standard USB and serial UART port interfaces. Equipped with the next-generation Impinj E910 reader chip, the TSL 3419 is an ultra high-sensitivity model that enables reading, writing, and authenticating of tags farther and faster with industry-leading receive sensitivity. This module offers multiple RF modes including High Speed Tag Acquisition Mode, High Sensitivity Mode, and Dense Reader Mode (DRM) ensuring optimal performance in even the most challenging environments.
NOTE: This product is a reader module – NOT a finished RFID reader – and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. If you are interested in an existing finished reader product, check out our line of finished TSL readers.
Data Sheet — TSL 3419 RAIN RFID Reader Module Developer Kit
Need help selecting the right reader module? Check out our reader module guide.
What's included?
- RAIN Development Board with TSL 3419 RAIN RFID Reader Module (4-Port) Included
- FCC or ETSI UHF Antenna - Depending on Selection Above
- Antenna Cable
- Power Supply
- USB-C and USB FTDI Cables
Why buy this developer kit?
The TSL 3419 RAIN RFID Reader Module Developer Kit provides one standard 3419 module plus all of the accessories required to start developing and testing custom RFID solutions. TSL 3419 is a high-performing UHF RFID reader module that offers worldwide support to accommodate global regulations. With four MMCx 50 Ω mono-static antenna ports, four configurable 3.3V I/O lines, and an Impinj E910 RFID core, this highly-configurable and flexible module provides the freedom to specify an antenna perfectly tuned to your unique application.
Features
- Provides connectors for power, USB, high-speed serial and GPIO pins.
- Push buttons to start/stop commands stored in the memory banks.
- Kit can be set up within minutes.
- Kit can be powered by DC (recommended) or USB (provided the USB-C data connection is capable of supplying up to 2A).
- Dedicated supporting software & documentation:
- Developer Kit User Guide
- STORM Protocol Explorer app
- STORM Protocol User Guide
- STORM command bank examples
| Product Type: | Reader Module Development Kit |
|---|---|
| ELECTRICAL: | |
| Air Interface Protocol: | EPCglobal Class 1 Gen 2 (ISO 18000-63) |
| Operating Frequency: | Global (860–960 MHz) - see data sheet for support regions |
| Transmit Power: | 1-31.5 dBm (1mW-1.4W) Conducted Output Configurable in 0.1 dBm steps |
| Max Receive Sensitivity: | Up to -94 dBm |
| Max Receive Distance: | Not published |
| Max Read Rate: | ≥ 1300 tags/second |
| Data Interface: | USB CDC Virtual COM Port, UART - Serial Port |
| GPIO: | Four 3.3V I/O line |
| Power Source: | 5-15V DC |
| MECHANICAL: | |
| Antenna Ports: | Four MMCX 50 mono-static ports |
| Dimensions: | 42 x 68 x 6.7 mm (1.65 x 2.68 x 0.26 in) |
| Weight: | 0.034 kg (0.08 lbs) |
| ENVIRONMENT: | |
| IP Rating: | Not published |
| Operating Temperature: | -20° to 60°C (-4° to 140°F) |
| APPLICATION INTERFACE: | |
| Host API: | Java, C#, C |
| Demo Software: | Not published |
| fbt-product: | 1665 |
| fbt-product: | 1238 |
| fbt-product: | 2958 |
| atc-product: | 4229 |
| atc-product: | 1642 |
| atc-product: | 1666 |
| atc-product: | 2966 |
