Loading... Please wait...

ThingMagic Nano Carrier Board

Hover over image to zoom

  • ThingMagic Nano Carrier Board | M6E-NANO-CB
  • ThingMagic Nano Carrier Board | M6E-NANO-CB
  • ThingMagic Nano Carrier Board | M6E-NANO-CB
  • ThingMagic Nano Carrier Board | M6E-NANO-CB
$263
SKU:
M6E-NANO-CB
Availability:
Usually Ships in 2 to 3 Business Days

 Product Description

ThingMagic Nano Carrier Board

ThingMagic Nano module (M6E-NANO) soldered to a carrier board with M6E form factor. ThingMagic Nano’s wide RF output range (0 dBm to +27 dBm) is important for the read/write requirements for RFID-enabled printers and tag commissioning stations. It features a surface mount package designed for the efficiency of SMT manufacturing, driving down the total cost for embedding RFID in volume applications, including handheld devices, consumables authentication, device configuration and access control.

NOTE: This product is a carrier board – NOT a finished RFID reader – and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. If you are interested in an existing finished reader product, check out our line of finished ThingMagic readers.

Data Sheet  ThingMagic Nano Carrier Board

view-data-sheet-2.png   

Module Comparison  ThingMagic Nano Carrier Board

module-comparison.png

Reader Module Guide  ThingMagic Nano Carrier Board

reader-module-guide-2.png

What's included?

  • ThingMagic Nano Carrier Board Unit

Why buy this Carrier Board?

The ThingMagic Micro Carrier Board is a perfect solution for prototyping and proof-of-concept applications. The board includes the thermal advantages of solder-down and heat spreader along with access to external connectors. It can also be used in the M6e Family Development Kit.

Features

  • 1 MMCX RF antenna connector.
  • Integral heat spreader.

Information

The ThingMagic Micro Carrier Board is NOT intended to replace the compatible M6e Family Development Kit. This carrier board is recommended for use in conjunction with the ThingMagic Nano Embedded RFID Module Developer Kit

Specifications

ELECTRICAL:
 
Air Interface Protocol:
EPCglobal Gen2V2 (18000-63)
Operating Frequency:
Global (see module data sheet for more info)
Transmit Power:
0 to +27 dBm
Max Receive Sensitivity:
Not Published
Max Receive Distance:
Over 3 m (10 ft)
Max Read Rate:
Up to 200 tags/second
Data Interface:
UART 3.3V
GPIO:
Four 3.3V bidirectional ports
Power Source:
DC 3.3 to 5.25 V
MECHANICAL:
 
Dimensions:
69 x 43 x 10 mm (2.72 x 1.69 x 0.39 in)
ENVIRONMENT:
 
IP Rating:
Not Published
Operating Temperature:
-20° to 70°C (-4° to 158°F)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Newsletter

Copyright 2018 atlasRFIDstore. All Rights Reserved.

2014 Morris Avenue, Birmingham, AL 35203

Click the button below to add the ThingMagic Nano Carrier Board to your wish list.