Key Features
- Includes 5 types of RFID tags for asset tracking applications
- All tags feature a smaller form factor for various assets
- Tags are suitable for metal mounting environments
ThingMagic M7e-PICO UHF RAIN RFID Reader Module Developer Kit by JADAK
$864.00
- UPC:
ThingMagic | SKU: M7E-PICO-DEVKIT
Accessories & Related Products
Key Features
- Content: Collection of popular articles from RFID Insider
- Topics: RFID basics to intermediate concepts, comprehensive Q&A
- Author: Suzanne Gotfryd, Director of Consumer Marketing at atlasRFIDstore
Key Features
- Smallest Form Factor: 18 mm L x 21 mm W x 3.0 mm H
- Wide RF Output Range: 0 dBm to +24 dBm
- High Tag Read Rate: Up to 300 tags per second
Key Features
- Module: ThingMagic M7e-DEKA UHF RAIN RFID Reader Module
- Includes: Module, test chassis, antenna, cables, power adapter, tags, schematics
- SDK: Mercury API for easy software integration
Key Features
- Range: 0-14 meters (0-45+ feet)
- Frequency: 860 MHz to 955 MHz
- Power: No battery required, powered by RF energy
Key Features
- Connectivity: Powered by USB via a computer
- Performance: Reads up to 150 tags per second
- Form Factor: 72 x 72 x 23 mm (2.83 x 2.83 x 0.91 in)
Key Features
- Diverse Form Factors: Wet inlays, wire tags, hard tags, etc.
- Includes Industry-Leading ICs: Monza R6-P, NXP UCODE 8, Impinj M730, M830
- Variety of Sizes: As small as 1.27 cm (0.5 in) up to 10.16 x 5.08 cm (4 x 2 in)
Product Details
ThingMagic M7e-PICO Embedded RFID Module Developer Kit
The M7e-PICO Developer Kit offers as complete solution to design and test new RFID functionality in OEM solutions. This kit provides hardware for ultra high-frequency (UHF) applications such as asset tracking, inventory management, patient safety, and product authentication. The included reader module offers an antenna port and supports the ability to transmit up to +24 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The on-board connector allows the module to be mated to a motherboard as an add-on option. The M7e-PICO platform uses the same Mercury API as other JADAK ThingMagic products, allowing for easy software integration and customization based on form-fit-function SKUs. This developer kit is the perfect way to make the most of your M7e-PICO reader module.
Note: This product is a reader module – NOT a finished RFID reader – and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. If you are interested in an existing finished reader product, check out our line of finished ThingMagic readers.
View Data SheetNeed help selecting the right reader module? Check out our reader module guide.
What's included?
- ThingMagic M7e-PICO UHF RAIN RFID Reader Module Developer Kit Unit by JADAK
- Test Chassis Unit
- 6 ft RP-TNC to RP-TNC Antenna Cable
- USB Cable
- 9V AC Power Adapter + Plug Adapter Kit (US, UK, EU, AU)
- Antenna Unit (7.5 in 7 dBiC patch antenna)
- Packet of Sample Tags
- Mercury API
- Full Schematics
Why buy this developer kit?
The ThingMagic M7e-PICO Developer Kit enables you to build a reader with the perfect balance between convenient size, flexibility of use, and raw RF power. The M7e-PICO module has a wide RF output range of 24 dBm, an Impinj E310 RAIN RFID reader chip, a high read rate of 300 tags per second, and a tag read range of 3 meters; meanwhile, the developer kit has these features plus it gives you everything you need to connect to a PC and start reading tags. The Mercury API is loaded on your host processor so you can write software to control the module in the DevKit chassis.
View Comparison GuideFeatures
- Rapid testing of RFID integration in existing products.
- Comprehensive development kit with hardware and software.
- Single board-edge antenna connection that can support a monostatic antenna.
- Small size, barely larger than a quarter.
- Separate read and write levels, command adjustable.
- High tag read rate.
- Impinj E310 RAIN RFID Reader Chip.
- Surface/mount package.
- Integration for OEMs designing for applications such as access control points, asset tracking, contactless payments, inventory management, patient safety, personal tracking, and product authentication.
Product Specs
| Product Type: | Reader Module Development Kit |
|---|---|
| Air Interface Protocol: | EPCglobal Gen 2v2 (18000-63) |
| Operating Frequency: | Global (see data sheet for more info) |
| Transmit Power: | 0 to +24 dBm |
| Max Receive Sensitivity: | Not Published |
| Max Receive Distance: | Over 3 m (10 ft) |
| Max Read Rate: | Up to 300 tags/second |
| Data Interface: | UART 3.3V |
| GPIO: | Four 3.3V Bidirectional Ports |
| Power Source: | DC 3.3 to 5.5 V |
| Antenna Ports: | 1 RP-TNC Female (on chassis) |
| Dimensions: | 18 x 21 x 3.0 mm (0.71 x 0.83 x 0.118 in) |
| Weight: | 0.454 kg (1 lb) |
| IP Rating: | Not Published |
| Operating Temperature: | -40° to 60°C (-40° to 140°F) |
| Host API: | C#/.NET, Java, C |
| Demo Software: | Not Published |
Customer Reviews
Sign in