ThingMagic M7e-DEKA UHF RAIN RFID Reader Module Developer Kit by JADAK

The M7e-DEKA Developer Kit offers as complete solution to design and test new RFID functionality in OEM solutions. This kit provides hardware for ultra high-frequency (UHF) applications such as asset tracking, inventory management, patient safety, and product authentication. The included reader module offers an antenna port and supports the ability to transmit up to +27 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The on-board connector allows the module to be mated to a motherboard as an add-on option. The M7e-DEKA platform uses the same Mercury API as other JADAK ThingMagic products, allowing for easy software integration and customization based on form-fit-function SKUs. This developer kit is the perfect way to make the most of your M7e-DEKA reader module.

Note: This product is a reader module – NOT a finished RFID reader – and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. If you are interested in an existing finished reader product, check out our line of finished ThingMagic readers.

Need help selecting the right reader module? Check out our reader module guide.

• ThingMagic M7e-DEKA UHF RAIN RFID Reader Module Developer Kit Unit by JADAK
• Test Chassis Unit
• 9V AC Power Adapter + Plug Adapter Kit (US, UK, EU, AU)
• Antenna Unit (7.5 in 7 dBiC patch antenna)
• 6 ft RP-TNC to RP-TNC Antenna Cable
• USB cable
• Packet of Sample Tags
• Mercury API
• Full Schematics

The ThingMagic M7e-DEKA Developer Kit enables you to build a reader with the perfect balance between convenient size, flexibility of use, and raw RF power. The M7e-DEKA module has a wide RF output range of 27 dBm, an Impinj E310 RAIN RFID reader chip, a high read rate of 300 tags per second, and a tag read range of 4.5 meters; meanwhile, the developer kit has these features plus it gives you everything you need to connect to a PC and start reading tags. The Mercury API is loaded on your host processor so you can write software to control the module in the DevKit chassis.

• Rapid testing of RFID integration in existing products.
• Comprehensive development kit with hardware and software.
• Small size, slightly bigger than a quarter.
• Separate read and write levels, command adjustable.
• High tag read rate.
• Low power consumption for efficient battery-use.
• Impinj E310 RAIN RFID reader chip.
• Integration for OEMs designing for applications such as access control points, asset tracking, contactless payments, inventory management, patient safety, personal tracking, and product authentication.