5 Examples of RFID Tool Tracking


By using RFID to track tools, companies can have confidence knowing that their assets are secure. RFID can also provide a wide range of tracking options and systems depending on what the overall goal of your system is. Below are five examples of how RFID is used in tool tracking:

1. Holt-Cat Tracking for Tool Maintenance

Problem: Holt-Cat’s Machine Division is in charge of maintaining tens of thousands of tools ranging in price from a few dollars up to $18,000. With 16 separate facilities in the state of Texas, the movement of these tools without proper tracking was resulting in loss of money and employee productivity.

Solution: Omni-ID UHF RFID tags on every tool and HF RFID tags on each employee badge enabled Holt-Cat’s software to read and associate the employee with the tool removed from the tool room. By using a portal-type RFID system at each entrance/exit of a tool room, Holt-Cat was able to monitor the employees and tools without adding additional processes that could have slowed down productivity.

Notable Take-away: By using an RFID tool tracking system, Holt-Cat was able to see a return on investment in less than eight months.

Read the full case study.

2. Greenville Hospital Keeping up with Expensive Equipment

Problem: The loss of expensive surgical equipment in the 90,000 square foot Greenville Hospital was resulting in lost time and money due to the time spent looking for and/or replacing equipment. The staff was experiencing the greatest amount of tool loss after usage in patients’ rooms and operating rooms.

Solution: Each hospital room is thoroughly cleaned after the patient leaves, so portal systems developed by Jamison and ThingMagic were placed in all laundry and decontamination rooms. All tools were tagged with RFID tags­, so when a tagged tool was read at a portal location, an alert was triggered to notify the staff that a tool was in the wrong location. Handheld readers deployed to staff members were designed to locate specific tagged equipment and read the usage history of each tool.

Notable Take-away: With the reduction in equipment loss and wasted time, Greenville Hospital expects a return on investment within one year and is currently expanding their system.

Read the full case study.

3. Motorola Increasing Employee Productivity

Problem: Wasted time and money spent staffing an equipment/tool room with employees in order to maintain inventory and prevent lost or stolen tools.

Solution: Pressure sensitive mats alert the RFID reader to scan the employee’s badge, which allows the employee access to the tool room. All the tools are tagged, and when the employee is leaving the room, the doorway reader and antenna system scan the employee’s badge as well as the tool’s RFID tag.

Notable Take-away: With an initial $250,000 return on investment, and growing, Motorola has seen boosted productivity, less employee hours in equipment rooms, and no equipment losses.

Read the full case study.

4. Grunnarbeid Reducing Daily Tool Deliveries by 80%

Problem: On a daily basis, Grunnarbeid has thousands of tools waiting to be delivered to different construction sites. Tools are often lost during transportation, and many man hours are wasted searching for them. As a result of the delivery delay, other employees are forced to waste time waiting for the lost tools.

Solution: All high-value tools are tagged with Omni-ID tags, and when read, the tag’s information as well as longitude and latitude (from the reader) are uploaded to the software component. Dock doors are fitted with portal systems, delivery vehicles have fixed reader systems, and the warehouse staff is provided with handheld readers.

Notable Take-away: From information gathered from the pilot program, it is estimated that Grunnarbeid will reduce daily deliveries (consisting of employee hours and company money) by 80 percent.

Read the full case study.

5. Ford / DeWALT Keeping Mobile Inventory of Tools

Problem: Ford, DeWALT, and ThingMagic came together to create a product to address a common problem in the construction industry. Mobile inventory can take hours in the construction industry, and loss of high value tools are a common problem.

Solution: These three companies created a mobile solution called ‘Tool Link’ which will read the RFID tagged tools in the bed of a pickup truck, which has built-in RFID readers and antennas to take inventory.

Notable Take-away: Tool Link is able to take mobile inventory before and after a jobsite so that unpreparedness and lost tools are a thing of the past. This system will help to revolutionize any industry that relies on tools on a day to day basis.

Read the full case study.


Do you have any questions about RFID tool tracking? Leave a comment below.

If you’d like to learn more about all things RFID, check out our website, our YouTube channel, or contact us.

To learn more about RFID asset tracking, check out the links below!

Download RFID Tool Tracking Buyer's Guide