Description
*Subject to availability. Contact us for recommended replacement product.*
Avery Dennison Smartrac Belt RFID Wet Inlay | Monza R6
Avery Dennison Smartrac’s Belt RFID inlays are designed for item level, logistics, and retail applications offering high performance in apparel and brand protection, industrial and supply chain management solutions. The special design takes into account RF requirements for close coupling. They have good tolerance and performance on difficult-to-tag or low-detuning materials such as cardboard and plastics, and in other demanding environments. These tags are included on the approved inlay list by the ARC Program at the RFID Lab at Auburn University when used in retail applications, and comply with categories A, B, C, D, F, G, I, K, M, N, Q, W2, W3, W4, W5, and Y.
Data Sheet — Avery Dennison Smartrac Belt RFID Wet Inlay | Monza R6
Need help selecting the right tag? Check out our tag guide.
Why buy this tag?
The Avery Dennison Smartrac Belt RFID Wet Inlay is included on the approved inlay list for boxed electronics by the ARC Program at the RFID Lab at Auburn University, making it ideal for the retail supply chain and suppliers. It is also recommended by Impinj for the fixed-base xArray system.
Features
- Compact 3 inch form factor.
- ISO 9001:2008 Quality Management System and ISO 14001:2004 Environment Management System support.
- Quality Assurance: 100% performance tested.
- International Standards: EPC Class 1 Gen 2, ISO 18000-6C.
- Unique TID and enables pre-serialized EPC.
| Product Type: | Tag |
|---|---|
| ELECTRICAL: | |
| Air Interface Protocol: | EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) |
| Operating Frequency: | Global (860-960 MHz) |
| IC Type: | Impinj Monza R6 |
| Memory: | EPC 96 bits |
| EPC Memory Content: | Unique, auto-serialized |
| Max Read Distance: | Up to 14 m (45.9 ft), depending on environment |
| Applicable Surface Materials: | Plastic, Cardboard, Glass |
| ARC Approved Categories: | A, B, C, D, F, G, I, K, M, N, Q, W2, W3, W4, W5, Y |
| MECHANICAL: | |
| Tag Form Factor: | Wet inlay |
| Tag Materials: | Printable PET (Thermal Transfer) |
| Attachment Method: | Acrylic, water borne adhesive |
| Dimensions: | 73 x 13 mm (2.9 x 0.5 in) |
| Weight: | 1 g |
| ENVIRONMENT: | |
| Operating Temperature: | -40 °C to +85 °C (-40°F to 185°F) |
