Key Features
- Form Factor: Compact patch, very thin (3 mm / 0.12")
- Polarization: Circular, wide beam radiation pattern
- Applications: Smart shelves, displays, panels, and tables
ThingMagic USB Pro RFID Reader
$601.00
- UPC:
- 692193898191
ThingMagic | SKU: USB-6EP
Contact Us for Lead Time
All Sales Final
Accessories & Related Products
Key Features
- Interface: Streamlined and user-friendly
- Features: Read, write, lock, and unlock tags
- Encoding: Eliminate tedious manual tag encoding
Key Features
- Connector A: RP-SMA Male (connects to RP-SMA Female)
- Connector B: RP-TNC Female (connects to RP-TNC Male)
- Impedance: 50 Ohms
Key Features
- Diverse Form Factors: Wet inlays, wire tags, hard tags, etc.
- Includes Industry-Leading ICs: Monza R6-P, NXP UCODE 8, Impinj M730, M830
- Variety of Sizes: As small as 1.27 cm (0.5 in) up to 10.16 x 5.08 cm (4 x 2 in)
Key Features
- Service: Middleware Configuration
- Includes: Installation, firmware, license, settings
- Goal: Reduce reader setup time pre-shipment
Key Features
- Gain: 9 dBic Circular Polarization
- Size: 30.48cm x 30.48cm (12" x 12") Outdoor Panel Antenna
- Frequency: 902-928 MHz (FCC)
Key Features
- Type: AEI ATA Protocol License
- Compatible With: ThingMagic USB Pro Reader
- Purpose: Expands reader capability for AEI ATA tags
Product Details
*Limited availability. Please contact us for personalized assistance.*
ThingMagic USB Pro RFID Reader
The ThingMagic USB Pro RFID Reader allows solutions developers to support applications that require desktop reading and writing of EPC Global Gen2 tags as well as other protocols such as ISO18000-6B, IPx and AEI ATA through additional license. Based on ThingMagic’s best-in-class M6e-Micro LTE UHF RFID module, the USBPro RFID Reader is controlled and powered by a host PC or laptop through a USB interface and supports autonomous operation. The ThingMagic USB Pro RFID Reader is compatible with ThingMagic’s application development tools, including Universal Reader Assistant, permitting rapid creation of solutions to support a wide range of applications. The USB Pro RFID Reader is an ideal solution for tag commissioning, manufacturing WIP, document tracking, retail POS, and workflows for healthcare, events, and hospitality applications.
View Data SheetNeed help selecting the right reader? Check out our reader guide.
What's included?
Why buy this reader?
The ThingMagic USB Pro RFID Reader is a cost-effective and easily deployable 1W device that allows solution developers to support a wide range of applications that require near or far field desktop reading and writing of EPC Global Gen2V2, AEI ATA, ISO 18,000-6B and IPx tags. The 2nd external antenna allows for expanded applications including small portals, POS devices and kiosks.
View USB RFID Reader Comparison GuideFeatures
- Support for EPC Gen2V2 (ISO18000-63), AEI ATA, ISO 18000-6B, IPx protocols.
- Powered by PC, laptop or tablet through a host USB interface.
- Windows, Android or Mac host operating system.
- Support in the 865-869 and 902-928 UHF RFID carrier frequency ranges to accommodate worldwide regulations.
- Certifiable for operation in countries adopting FCC, ETSI, India, Korea, Australia, P.R. China, and Japan regulatory specifications (Open (Customizable) 865-868 MHz and 902-928 MHz).
- Internal linear polarized antenna with peak gain of 1 dBi.
- Additional antenna port for 2nd external antenna.
- ThingMagic Reader Assistant software and applications development tools.
- 50 tags/second read rate.
- High impact plastic case.
Optional Supported Protocols
The protocols below can be added to each reader at an additional cost. If you have any questions, please contact us.