- Capacity: 750VA / 750W Pure Sine Wave Line-Interactive Battery Backup
- Outlets: 8 NEMA 5-15R with AVR, Corrects 80V-151V Without Using Battery
- Mounting: 2U Rack/Tower with Hot-Swappable Batteries & Expandable Runtime
Maintain continuous operation of your critical IT infrastructure with the Eaton Tripp Lite SMART750RMXL2UN 750VA Line-Interactive UPS. This robust power solution delivers reliable, pure sine wave power to high-end servers, networking equipment, and sensitive electronics, protecting them from blackouts, brownouts, surges, and line noise. With a 750VA/750W capacity and unity power factor, you can confidently connect more equipment, ensuring maximum uptime for your SMB, edge network, or enterprise deployments.
Gain complete control and peace of mind with the included WEBCARDLXE network management card, allowing 24/7 remote monitoring and management of your UPS and connected devices. The SMART750RMXL2UN features 8 NEMA 5-15R outlets, including two programmable load banks for shedding non-critical loads to extend runtime, and offers flexible deployment options in a 2U rack or tower configuration. Extended runtimes are easily achieved by adding up to four optional external battery packs (BP48VRM2U, sold separately).
View Data SheetThe Eaton Tripp Lite SMART750RMXL2UN UPS offers unity power factor with a 750VA/750W capacity, ensuring maximum power delivery to your critical IT equipment, even during outages, thanks to its pure sine wave output and seamless battery backup with optional extended runtime. Its pre-installed WEBCARDLXE network interface provides comprehensive 24/7 remote monitoring and management, including automatic reboots and safe shutdowns, making it an ideal solution for distributed IT, telecommunications, and enterprise environments.
| Product Type: | Uninterruptible Power Supply |
|---|---|
| Output Capacity: | 750VA (750 W) |
| Output Receptacles: | 8 NEMA 5-15R Outlets (2 Switchable Load Banks) |
| Runtime Full Load: | 8.5 Minutes (750W) |
| Runtime Half Load: | 20.7 Minutes (375W) |
| AC Mode Efficiency Rating: | 95% |
| Transfer Time: | 4 ms (AC to Battery), 2 ms (Battery to AC) |
| Power Input: | 120V AC, 50/60 Hz, NEMA 5-15P |
| Input Voltage Range: | 80V–151V (Normal Mode); adjustable to 70–153V (Extended Mode) |
| Surge Protection: | 380 Joules |
| Data Interface: | USB, DB9 Serial, RJ45 Network, Micro-USB, EPO |
| Battery Type: | Valve Regulated Lead Acid (VRLA), 48V DC |
| Battery Recharge Time: | Less than 4.5 hours (10% to 90%, typical full load discharge) |
| Expandable Runtime: | Up to 4 optional external battery packs (BP48VRM2U, sold separately) |
| Mounting: | 2U Rack-Mount or Tower |
| Dimensions: | 88 x 441 x 334 mm (3.45 x 17.35 x 13.15 in) |
| Operating Temperature: | 0° to 40°C (32° to 104°F) |
| Storage Temperature: | -15° to 50°C (5° to 122°F) |
| Relative Humidity: | 0–95% Non-Condensing |
| Audible Noise: | 45 dBA Maximum (Front Side, 1 m) |