Key Features
- Input: 100-240 VAC
- Output: 24V DC
- Compatible With: FEIG LRU and MRU readers
FEIG LRU1002 Fixed Long Range UHF RFID Reader
Contact Us for Availability
- UPC:
FEIG | SKU: 4128.001.00
Contact Us for Lead Time
All Sales Final
Accessories & Related Products
Key Features
- Polarization: Circularly polarized
- Construction: Robust and durable
- Mounting: VESA mounting, suitable for indoor and outdoor
Key Features
- Connectivity: PoE+ or 24V Power Supply
- Features: Integrated antenna and signal light
- Durability: IP67 rated for wet environments
Key Features
- Ports: 1 integrated, 3 external antenna ports
- Connectivity: USB interface
- Read Range: Up to 50 cm (20 in) (integrated), up to 4 m (13 ft) (external)
Key Features
- Length: 6.1 m (20 ft)
- Connectors: SMA Male to TNC Male
- Cable Type: UHF Antenna Cable
Key Features
- Type: Connector Sealing Cap
- Compatible With: FEIG LRU1002 Reader
- Increases IP Rating: From IP53 to IP64
Key Features
- Ports: 4 antenna ports
- Performance: Read range up to 10 m (32.8 ft)
- OS: Edge computing device with Linux OS
Key Features
- Range: 0-14 meters (0-45+ feet)
- Frequency: 860 MHz to 955 MHz
- Power: No battery required, powered by RF energy
Key Features
- Diverse Form Factors: Wet inlays, wire tags, hard tags, etc.
- Includes Industry-Leading ICs: Monza R6-P, NXP UCODE 8, Impinj M730, M830
- Variety of Sizes: As small as 1.27 cm (0.5 in) up to 10.16 x 5.08 cm (4 x 2 in)
Product Details
*This product is reaching end-of-life and will soon be discontinued. Visit FEIG LRU4000 Long-Range Fixed UHF RFID Reader for a recommended replacement.*
FEIG LRU1002 Fixed Long Range UHF RFID Reader
The FEIG LRU1002 Fixed Long Range UHF RFID Reader is a consistent long range reader intended for difficult to read industrial environments. The LRU1002 features a read range of up to 12 m (40 ft) and high receiver sensitivity that allows for accurate performance in suboptimal environments with multiple readers operating at the same time. Equipped with 2 inputs, 2 outputs, and 2 relay outputs, the LRU1002 enables the control of external components and the signaling of events. The LRU1002 is designed to be easy to use and understand, featuring green LEDs for active antennas, blue LEDs for read events, and red LEDs for possible antenna mismatching. The LRU1002 supports interfacing via Ethernet, RS232, USB and Wiegand, and all interface ports as well as the 4 SMA-Female antenna ports on the reader are easy to access.
Note: The addition of an optional sealing cap will make this reader completely dust proof and protected against splashes of water from all directions. Visit FEIG LR.CSC-IP64 Connector Sealing Cap for a compatible product.
View Data SheetNeed help selecting the right reader? Check out our reader guide.
What's included?
- FEIG LRU1002 Fixed Long Range UHF RFID Reader Unit
- One Year Standard Manufacturer Warranty
- FEIG 24V Power Supply, if selected above (Please note that using a non-manufacturer approved power supply voids the warranty)
Why buy this reader?
The FEIG LRU1002 Fixed Long Range UHF RFID Reader delivers consistent tag reads over a large area. Equipped with multiple interface options, inputs, outputs, and relays, the LRU1002 is a flexible solution for industrial environments.
Features
- Read range of up to 12 m (40 ft).
- 4 external Female SMA antenna ports.
- Configurable output power between 100mW and 2000mW.
- Supports Low Level Reader Protocol (LLRP).
- 6 combined inputs and outputs.
- Support for Ethernet, RS232, USB, and Wiegand.
- Protection against fault conditions like antenna shortcut or mismatching.
- Secure storage of application keys with Secure Element.
- Support for keyboard wedge mode to emulate keyboard keystrokes.
- Ideal applications include: incoming and outgoing stations, traffic management, and Vehicle Access Control.
Product Specs
| Product Type: | Fixed Reader |
|---|---|
| Air Interface Protocol: | EPC UHF Class 1 Gen 2, EPC UHF Class 1 Gen 2 v2, ISO 18000-6C |
| Operating Frequency: | FCC (902-928 MHz) |
| Transmit Power: | 33 dBm |
| Max Receive Sensitvity: | Not Published |
| Max Read Distance: | 12 m (40 ft) |
| Max Read Rate: | Up to 700 Tag Reads per Second |
| Data Interface: | Ethernet, RS232, USB, and Wiegand |
| GPIO: | 2 Inputs, 4 Outputs |
| Power Source: | 24V Power Supply |
| Antenna Ports: | 4 External SMA-Female (50 Ohm) Ports (Connects to SMA-Male) |
| Dimensions: | 260 x 157 x 68 mm (10.24 x 6.18 x 2.68 in) |
| Weight: | 1.8 kg (3.97 lb) |
| IP Rating: | IP 53 |
| Operating Temperature: | -40° to 70° C (-40°F to 158°F) |
| Host API: | Not Published |
| Demo Software: | ISO-START+ |
Customer Reviews
Sign in