Loading... Please wait...

Keonn AdvanGPIO RFID Connection Board

Hover over image to zoom

  •  Keonn AdvanGPIO RFID Connection Board | ADGP-110
$109
SKU:
ADGP-110
Availability:
Usually Ships in 1 to 2 Weeks

 Product Description

Keonn AdvanGPIO RFID Connection Board

The Keonn AdvanGPIO RFID Connection Board makes it very easy to control some Keonn products through the GPIO (General Purpose Input Output) of many RFID UHF reader models. The AdvanGPIO connection board can easily control the compatible Keonn products listed below by sending simple commands to the reader, without the need of developing software libraries.

In general, the AdvanGPIO is used in the following situations:

  • When the GPIO of the RFID reader does not provide power supply.
  • When the GPIO of the RFID reader provides power supply, but it’s less than 5V.
  • When the RFID reader GPIO electronics are not compatible with AdvanMux and AdvanPhaser.
  • When it is needed to adapt electronic levels between the RFID reader GPIO and AdvanMux / AdvanPhaser.
  • When there is not a Keonn adapter cable available to connect AdvanMux and AdvanPhaser directly to the reader GPIO.
  • When the overall consumption of all AdvanMux or AdvanPhaser units connected to the same reader exceeds the output power of that reader’s GPIO.
  • When the RFID reader output voltage is higher or equal to 5V, but the number of AdvanMux or AdvanPhaser connected in daisy-chain exceeds 4 units.

Data Sheet  Keonn AdvanGPIO RFID Connection Board

view-data-3.png

What's included?

  • Keonn AdvanGPIO RFID Connection Board

Why buy this connection board?

The Keonn AdvanGPIO Connection Board provides an easy way to control compatible Keonn multiplexers and phase shifters by various compatible RFID readers.

Features

  • Wide input voltage range.
  • Very fast and easy connection.
  • Compatible with most reader models.
  • Makes it very easy to control Keonn multiplezers and phase shifters by RFID readers.
  • Common applications: RFID systems that require more than 4 antennas connected to the same reader, RFID systems that require to control electronically the orientation of the antenna beam, smart shelves, smart surfaces, loss prevention systems, and overhead real-time inventory systems.

Compatibility

The Keonn AdvanGPIO RFID Connection Board is compatible with following Keonn products:

The Keonn AdvanGPIO RFID Connection Board is compatible with various Sirit, Motorola, Impinj, Alien, and ThingMagic RFID readers.

Specifications

MECHANICAL:
Connectors:
1 input PoE class I power supply: type: RJ45, 1 input auxiliary supply: type: receptacle power connector, 1 input digital control bits & power supply: type plug, 6 way, 1 input digital control bits: type: RJ45, and 1 output digital control bits & pow
Power Supply (Through PoE Class I):
Pin 4 & 5, pin 7 & 8: Accepts 48 V in either polarity
Power Supply (Through receptacle power connector):
Pin 1 , pin 2: Accepts from 9 V to 24 V in either polarity
Power Supply (Through plug, 6 way):
GND pin 6. Vcc pin 5. Accepts from 7 V to 24 V. Reverse polarity protected
Reader Connector:
4 input RJ45 connector
IN Connector:
4 input plug connector
Digital Inputs:
0 V/5 V TTL or open collector
Dimensions:
67 x 67 x 18 mm (2.6 x 2.6 x 0.7 in)
Weight:
0.035 kg (0.077 lbs)
ENVIRONMENT:
Operating Temperature:
-40 °C to 55 °C (-40 °F to 131 °F)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Newsletter

Copyright 2017 atlasRFIDstore. All Rights Reserved.

1500 1st Avenue North, Birmingham, AL 35203

Click the button below to add the Keonn AdvanGPIO RFID Connection Board to your wish list.