|
ThingMagic UHF USB RFID Reader
|
|
Laird (RHCP) RFID Antenna 902-928 MHz
|
|
Zebra RZ400 RFID Printer (203 dpi, Serial, Parallel, USB, UHF)
|
|
Our Price: $445.00
|
|
|
|
Our Price: $125.00
|
|
|
|
|
|
|
|
The USB RFID Reader is a low cost platform for developing and deploying interactive read/write applications. Driven by ThingMagic's Mercury 5e-Compact UHF RFID reader module, the USB RFID Reader is controlled and powered by a desktop or notebook PC.
|
Laird RFID Antenna; 902-928 MHz; 9 dBic; Right Hand Circular Polarization (RHCP); 96 inch coax cable; RP-TNC connector; 4 stud mount.
|
Zebra RZ400 RFID Printer (203 dpi, ZPLII, XML, 16MB SDRAM, 120VAC Power Cord, Serial, Parallel and USB Interfaces, UHF).
|
|
|
Impinj Speedway Revolution R420 UHF RFID Reader (4 Port)
|
|
MTI RFID Antenna - MT-262006/TRH/A/K
|
|
MTI RFID Antenna - MT-262024/TRH/A/K
|
|
|
|
Our Price: $165.00
|
|
|
|
Our Price: $141.00
|
|
|
|
|
|
|
Impinj's innovative Speedway® Revolution reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety.
|
MTI RFID Antenna; 902-928 MHz; Circular Polarization; Mono-static; 9 dBic; 12 in. x 12 in. (305 mm x 305 mm); RP-TNC Connector; IP 67 rating; [Does not include cable.]
|
MTI RFID Antenna; 902-928 MHz; Circular Polarization; Mono-static; 7.5 dBic; 7.5 in. x 7.5 in. (190 mm x 190 mm); RP-TNC Connector; IP 67 rating; [Does not include cable.]
|
|
|
MTI RFID Antenna - MT-263003/N
|
|
MTI RFID Antenna Mounting Kit - MT-120018
|
|
MTI RFID Antenna Mounting Kit - MT-120018/A
|
|
Our Price: $129.00
|
|
|
|
Our Price: $27.95
|
|
|
|
Our Price: $27.95
|
|
|
|
|
|
|
MTI RFID Antenna; 902-928 MHz; Linear Polarization; Mono-static; 10 dBic; 12 in. x 12 in. (305 mm x 305 mm); N-female Connector; IP 67 rating; [Does not include cable.]
|
Fully articulating MTI RFID Antenna Mounting Kit for the 12 x 12 inch (305 x 305 mm) MTI Antennas:
MT-262006 MT-242043 MT-263003
The distance from the center of any given antenna mounting hole to the center of any adjacent hole is 100 mm.
|
Fully articulating MTI RFID Antenna Mounting Kit for the 7.5 x 7.5 inch (190 x 190 mm) MTI Antennas:
MT-262024 MT-262013
The distance from the center of any given antenna mounting hole to the center of any adjacent hole is 66 mm.
|
|
|
Alien Squiggle Wet Inlay (WHITE face) - roll of 10,000
|
|
Alien Squiggle Wet Inlay (WHITE face) - roll of 20,000
|
|
UPM DogBone RFID Wet Inlay (Monza 4D) - roll of 5,000
|
|
Our Price: $1,488.00
|
|
|
|
Our Price: $2,780.00
|
|
|
|
Our Price: $850.85
|
|
|
|
|
|
|
The Alien Technology ALN-9640 Squiggle is a high performance general purpose RFID inlay for use in a wide variety of applications, such as supply chain management and race timing.
|
The Alien Technology ALN-9640 Squiggle is a high performance general purpose RFID inlay for use in a wide variety of applications, such as supply chain management and race timing.
|
The UPM DogBone UHF RFID Tag is a general purpose high-end RFID tag for global supply chain management. It is best suited for pallet, case and item-level use. It is optimized for corrugated, plastic and highly detuning materials and is Walmart, DoD and METRO Group compliant. The UPM Raflatac DogBone RFID tag is a global top performer for a wide range of SCM, apparel, transportation, and race timing applications.
|
|
|
Alien ALR-9900+ Enterprise RFID Reader
|
|
ThingMagic M6 UHF RFID Reader (4 Port)
|
|
Alien Squiggle Wet Inlay (CLEAR face) - roll of 10,000
|
List Price: $2,199.00 Our Price: $1,544.82 You save $654.18!
|
|
|
|
Our Price: $1,395.00
|
|
|
|
Our Price: $1,363.00
|
|
|
|
|
|
The FCC compliant Alien® ALR-9900+ Enterprise Category Reader enables users to deploy manageable, robust, best-inclass EPC Gen 2 RFID solutions for supply chain, manufacturing and asset management applications.
This feature-rich reader delivers exceptional performance with best-in-class receive sensitivity, enhanced interference rejection, Dynamic authentication, a monostatic antenna architecture and a compact footprint, delivering high read rates for demanding applications in an easy to integrate, easy to manage package.
|
Building on the ease of use, reliability and enterprise-grade performance ThingMagic products are known for, the M6 offers a low-profile form factor, rugged service operating capabilities and the industry’s highest transmit power for a Power over Ethernet (PoE) capable reader. These features make the M6 well suited for enterprise, commercial and industrial environments where high performance in a wide range of operating conditions is required.
|
The Alien Technology ALN-9640 Squiggle is a high performance general purpose RFID inlay for use in a wide variety of applications, such as supply chain management and race timing.
|
|
|
Alien Squiggle Wet Inlay (WHITE face) - roll of 500
|
|
Confidex Halo
|
|
EZ-P-4 Mounting Bracket for Laird 10"x10" RFID Antenna
|
|
Our Price: $145.00
|
|
|
|
Our Price: $3.31
|
|
|
|
Our Price: $60.00
|
|
|
|
|
|
|
The Alien Technology ALN-9640 Squiggle is a high performance general purpose RFID inlay for use in a wide variety of applications, such as supply chain management and race timing.
|
Confidex Halo™ on-metal UHF RFID tag combines light weight, a small footprint and durable encapsulation without sacrificing RF performance. The tag has been designed to be easily attached by cable ties through its mounting holes, adhesive or specially designed magnetic holder, which enables the tag to be moved from place to place when applicable.
Due to innovative solutions like Confidex Halo™, inventory management with RFID is one of the fastest growing applications as it cuts down the time and resources needed for asset inventory tasks. The tag’s design makes it also ideal for tracking IT assets.
|
Mounting Bracket for Laird 10"x10", 4-stud RFID Antenna. This bracket has a 4" arm that is fully articulating and extremely quick and easy to adjust. Made from durable black composite material.
|
|
|
Impinj Threshold RFID Antenna, FCC (902-928 MHz)
|
|
Impinj Threshold RFID Antenna, ETSI (865-868 MHz)
|
|
Impinj SMA to R-TNC 4 Meter RFID Antenna Cable
|
|
Our Price: $365.00
|
|
|
|
Our Price: $365.00
|
|
|
|
Our Price: $75.00
|
|
|
|
|
|
|
Initially designed for boundary/threshold crossing applications, the Impinj Threshold antenna has a very wide beam width to maximize zone coverage. Threshold antennas provide a consistent and continuous read zone when linearly distributed head-to-tail. At 46 x 9 x 2 cm, the Threshold antenna's planar form factor fits readily onto fencing or other borders.
|
Initially designed for boundary/threshold crossing applications, the Impinj Threshold antenna has a very wide beam width to maximize zone coverage. Threshold antennas provide a consistent and continuous read zone when linearly distributed head-to-tail. At 46 x 9 x 2 cm, the Threshold antenna's planar form factor fits readily onto fencing or other borders.
|
Impinj SMA to R-TNC 4 Meter RFID Antenna Cable.
|
|
|
Impinj SMA to R-TNC 8 Meter RFID Antenna Cable
|
|
6' R-TNC to R-TNC Antenna Cable
|
|
20' R-TNC to R-TNC Antenna Cable
|
|
Our Price: $120.00
|
|
|
|
Our Price: $28.00
|
|
|
|
Our Price: $39.00
|
|
|
|
|
|
|
Impinj SMA to R-TNC 8 Meter RFID Antenna Cable.
|
6' R-TNC male to R-TNC male Antenna Cable.
|
20' R-TNC male to R-TNC male Antenna Cable.
|
|
|
25' R-TNC to R-TNC Antenna Cable
|
|
35' R-TNC to R-TNC RFID Antenna Cable
|
|
35' N-Type to R-TNC RFID Antenna Cable
|
|
Our Price: $43.00
|
|
|
|
Our Price: $85.00
|
|
|
|
Our Price: $89.00
|
|
|
|
|
|
|
25' R-TNC male to R-TNC male Antenna Cable.
|
35' R-TNC male to R-TNC male RFID Antenna Cable; LMR 195.
|
35' N-Type male to R-TNC male RFID Antenna Cable; LMR 195.
|
|