Tag / Transponder Protocols:
RFID Protocol Support--EPCglobal Gen 2 (ISO 18000-6C) with Anti-Collision and DRM
RF Interface:
Antenna--Internal ceramic antenna with an average gain of -2.6 dBi from 860 to 960 MHz
RF Power Output--Separate read and write levels (into the antenna) are command-adjustable from 10 dBm to 23 dBm (200mW), +/-1.0 dBm accuracy.*
Frequency--Pre-configured for the following regions: FCC (NA, SA) 902-928 MHz ETSI (EU) 865.6-867.6 MHz, 869.85 MHz MIC (Korea) 910-914 MHz SRRC-MII (P.R.China) 920-925 MHz ‘Open’ (Custom) 860-960 MHz
Data/Control Interface:
Physical--USB mini-B connector, with 2 foot (61 cm) cable terminated in A-type plug).
Signaling--Asynchronous serial interface with 3.3/5V logic levels; baud rates from 9600 to 921,600 bps
GPIO Sensors and Indicators--Two I/O command controlled LEDs and two I/O command queried switches.
Protocol Command-response protocol protected by length field and 16-bit CRC.
Physical:
Dimensions (not including stand)--3.8 in L x 2.4 in W x 1.0 in H (97 mm L x 61 mm W x 25 mm H)
Power:
DC Power Required--DC Voltage: 5 VDC (Powered by USB interface); DC Power: 2.9 W (570 mA ) max; Supplied interface cable terminates in two type-A plugs: one for power and signal, the second for additional power if necessary.
Idle Power Consumption--1.7 W max at idle (Power management modes can be used to reduce this to as little as 0.1 W)
Environment:
Regulatory--FCC 47 CFR Ch. 1 Part 15; Industrie Canada RSS-21 0; ETSI EN 302 208; ETSI EN 300 220
Operating Temp.-- -20C to +60C
Storage Temp.-- –40C to +85C
Architecture:
RFID ASIC--Intel R1000
User-accessible Flash Memory--16 kB
Tag Buffer--200 tags
Performance:
Tag Read Rate--Over 190 tags/second
Tag Read Distance--Up to 12 inches (31 cm) depending on tag sensitivity and orientation.
