 |
 |
 |
|
Sirit INfinity 510 UHF RFID Reader Development Kit
The DK-510-1 RFID development kit is an easy to use, cost effective tool for evaluating the performance of the INfinity 510 Gen 2 reader in a lab or actual application environment. The kit contains all necessary components to create a fully functional RFID reader solution. With the DK-510-1, you will be able to install and configure a system and begin testing applications within minutes.
The DK-510-1 contains an INfinity 510 worldwide reader, an IM-510-1 interface module, 2 antenna, and all necessary cables to connect the system components. In addition, the INfinity 510 Reader Setup Tool, and RAPID libraries are included to speed configuration and application development for the INfinity 510.
The INfinity 510 redefines the state-of the-art for RFID readers. This powerful UHF reader system is designed for enterprise class applications and features best-in-class air interface performance. The INfinity 510 was designed from the ground up to provide worldwide regulatory support from a single platform.
Applications:
With its exceptional read rate performance and 4 main monostatic antennas, the INfinity 510 easily integrates into most supply chain and closed loop UHF installations including dock door portals and conveyors systems but can also be used for applications including forklifts, point-of-sale, access control and many others.
Development Kit Contents:
INfinity 510 Worldwide UHF RFID Reader
Modified Power Supply for INfinity 510
INfinity 510 Interface Module
Two 860 – 960 MHz RHCP Antenna
Two 3m N-Type male to RN-TNC plug LM-240 cable
1m INfinity 510 Interface Module Power Cable
1m INfinity 510 Interface Module Data Cable
2m Cross-over Ethernet Cable
2m RS-232 Cable
AC Power cord from appropriate region
Sample Gen 2 RFID Tags
Reader Setup Configuration Tool
RAPID™ Java and .NET Libraries
Documentation
- Operating Characteristics
- Management Features:
- Rich array of diagnostic and statistical reporting tools, user-confi gurable alarms, and a host of management features based on industry standard protocols. Allows seamless integration into existing IT infrastructures.
- User Applications:
- Java-based application framework that can be used to extend the reader capability, especially for complex enterprise requirements. Middleware and custom application solutions built for edge devices can also be hosted in the reader.
- Air Interface:
- High performance radio and modem subsystems employing sophisticated DSP technology and advanced singulation algorithms that optimize read rates in a wide range of end-user applications.
- Adaptive Noise Features:
- Intelligent algorithms within the INfi nity 510 automatically enable the modem to adapt to the instantaneous noise and interference level, thus optimizing air interface performance and robustness for a wide range of deployment scenarios.
- Upgradeability:
- Upgradeable firmware permits forward compatibility for future protocols.
- Specifications
- Frequency: UHF 860 MHz to 960 MHz
- Supported Transponders: Full support of mandatory and optional features (including optional user memory) of EPCGlobal Class 1 Generation 2 and ISO18000-6C. Also
- supports ISO 18000-6B, and Ucode 1.19 with future protocols supported through fi rmware updates.
- Operating Modes: Single Interrogator; Multiple Interrogator; Dense Interrogator
- Communications: 10/100 Ethernet Port; Serial Port; EIA/TIA-232-F; 115 kBaud with hardware handshaking (RTS/CTS), DCE
- GPIO: Digital Input/Output Port; 4 – optically coupled inputs, 25V max. Controllable input reference; 4 – open-collector outputs, 3-40V, 100mA max, 1W max
- RF Power: +30 dBm, conducted (FCC)
- Input Power: 12 to 24 Vdc (13W at idle; 34W typical (40W max) at max RF Power); 85 to 265 Vac, 50-60 Hz (optional)
- Antenna Connection: 4 - RP-TNC connections (reverse polarity); Fifth RP-TNC connection for LBT functionality
- LED Indicators: Sense, Transmit, Fault and Power
- Upgradeable Firmware: Yes
- Operating Temperature: -20°C to 60°C (-7°F to 140°F)
- Relative Humidity: 5 to 95%, non-condensing
- Dimensions (LxWxD): 22.0 x 30.0 x 5.6 cm (8.66 x 11.81 x 2.20 in.)
- Weight: 3.0 kg (6.5 lbs) `
- Regulatory: FCC Part 15, IC RSS-210, EN 300 220-3 v1.1.1, EN 301 489-1 v1.4.1, EN 301 489-3 v1.4.1, EN 302 208-2 v1.1.1, EN 50364:2001, EN 60950-1:2001, EN55022 (Class A), EN55024, EN61000-(3-2, 3-3), EN61000-(4-2, 4-3, 4-4, 4-6) and many other country standards through fi rmware updates.
- Case Material: Aluminum
|
|
|
 |
|
 |
|
