You are here: Home > RFID Readers > Fixed RFID Readers

RFID Fixed Readers from Atlas


RFID Fixed Readers from Atlas offer consistency in high performance.  Our RFID Readers offer the strong functionality needed to jumpstart a successful RFID system.  An RFID Reader is a radio frequency transmitter and receiver.  RFID Readers can read and write information to an RFID tag. RFID Readers can also be fixed or portable. Portable RFID Readers can be installed or carried almost anywhere.

Atlas offers almost every RFID Fixed Reader on the market.  We are continually updating and adding RFID products to our website, however, if there is a particular Reader you are searching for, but cannot find it, please contact us  as we will likely be able to provide it for you.
Sort By:
Page of 2
Impinj Speedway Revolution R420 UHF RFID Reader (4 Port)
Impinj Speedway Revolution R420 UHF RFID Reader (4 Port)
Our Price: $1,585.00

Impinj's innovative Speedway® Revolution reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety.
Impinj Speedway Connect Software for Impinj RFID Readers
Impinj Speedway Connect Software
Our Price: $250.00

Easily move beyond barcode technology with Speedway Connect software from Impinj. Speedway Connect software provides customers with a cost-effective method for readily converting barcode read points to RFID technology with minimal disruption to existing operations.

Speedway Connect is licensed software that runs on the Impinj Speedway Revolution and xPortal readers and enables users to easily plug-in RFID technology where barcode had previously been used – extending the reach of this powerful data collection technology. The simplified graphical user interface enables even those unfamiliar with RFID to set basic reader configurations. Data is passed to the PC application in keystrokes via USB-HID, serial, Ethernet or Web delivery for RFID deployment without costly software development or middleware expenses. Now’s the time to move beyond barcode with Speedway Connect software.
ThingMagic M6 UHF RFID Reader (4 Port-WiFi)
ThingMagic M6 UHF RFID Reader (4 Port) - with AC Power and Wi-Fi
Our Price: $1,540.00

Building on the ease of use, reliability and enterprise-grade performance ThingMagic products are known for, the M6 offers a low-profile form factor, rugged service operating capabilities and the industry’s highest transmit power for a Power over Ethernet (PoE) capable reader. These features make the M6 well suited for enterprise, commercial and industrial environments where high performance in a wide range of operating conditions is required.
Alien ALR-9900+ Enterprise RFID Reader
Alien ALR-9900+ Enterprise RFID Reader
List Price: $2,199.00
Our Price: $1,544.82
You save $654.18!

The FCC compliant Alien® ALR-9900+ Enterprise Category Reader enables users to deploy manageable, robust, best-inclass EPC Gen 2 RFID solutions for supply chain, manufacturing and asset management applications.

This feature-rich reader delivers exceptional performance with best-in-class receive sensitivity, enhanced interference rejection, Dynamic authentication, a monostatic antenna architecture and a compact footprint, delivering high read rates for demanding applications in an easy to integrate, easy to manage package.
ThingMagic M6 UHF RFID Reader (4 Port)
ThingMagic M6 UHF RFID Reader (4 Port)
Our Price: $1,395.00

Building on the ease of use, reliability and enterprise-grade performance ThingMagic products are known for, the M6 offers a low-profile form factor, rugged service operating capabilities and the industry’s highest transmit power for a Power over Ethernet (PoE) capable reader. These features make the M6 well suited for enterprise, commercial and industrial environments where high performance in a wide range of operating conditions is required.
Sirit INfinity 610 Four-Port RFID Reader
Sirit INfinity 610 Four-Port RFID Reader
List Price: $1,745.00
Our Price: $1,543.75
You save $201.25!

The IN610 is available in 4-port and 8-port versions. Eight port models can support up to eight antennas in mono-static mode or four bi-static (4x2), while the four port device supports four mono-static or two bi-static antennas.
 
Designed with global operations in mind, the IN610 line has models supporting frequencies and communications standards worldwide. The 902-928 MHz model is suitable for operation within North America and other regions compatible with FCC regulations. The INfinity 610 offers a wide portfolio of configuration and enterprise management tools that changes the paradigm of RFID system installation and management. For the end-user who needs a quick, out-of-the box solution, the INfinity 610 provides an intuitive installation wizard allowing the user to be able to begin reading tags within minutes.
Impinj Speedway Revolution R220 UHF RFID Reader (2 Port)
Impinj Speedway Revolution R220 UHF RFID Reader (2 Port)
Our Price: $1,095.00

Impinj's innovative Speedway® Revolution reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety.
Sirit INfinity 610 Eight-Port RFID Reader
Sirit INfinity 610 Eight-Port RFID Reader
List Price: $2,045.00
Our Price: $1,806.25
You save $238.75!

The IN610 is available in 4-port and 8-port versions. Eight port models can support up to eight antennas in mono-static mode or four bi-static (4x2), while the four port device supports four mono-static or two bi-static antennas.
 
Designed with global operations in mind, the IN610 line has models supporting frequencies and communications standards worldwide. The 902-928 MHz model is suitable for operation within North America and other regions compatible with FCC regulations. The INfinity 610 offers a wide portfolio of configuration and enterprise management tools that changes the paradigm of RFID system installation and management. For the end-user who needs a quick, out-of-the box solution, the INfinity 610 provides an intuitive installation wizard allowing the user to be able to begin reading tags within minutes.
ThingMagic Mercury5 UHF RFID Reader
ThingMagic Mercury5 UHF RFID Reader
Our Price: $1,695.00

The Mercury5 is fully compatible with Mercury4 interfaces and deployments, and supports the same high levels of network, security, developer and other functionality, including fully optimized support for EPC Generation 1 Class 1 and Class 0 and ISO 18000-6B, as well as EPC Generation 2.  Like its predecessor Mercury4, the new Mercury5 fully supports Dense Reader Mode. But it goes well beyond DRM to ignore all interference - not just interference from other DRM-compliant readers. As a result, Mercury5 outperforms DRM-only readers anywhere there are multiple sources of interference. This is why it gives more 100% reads more often.
Sirit INfinity 510 UHF RFID Reader
Sirit INfinity 510 UHF RFID Reader
List Price: $2,199.00
Our Price: $1,873.75
You save $325.25!

Sirit INfinity 510 UHF RFID Reader (Ultra High Frequency 860 – 960 MHz; High-Performance, Multi-Protocol Reader)